837250
Pair standard PMC-HMC gripper jaw
The gripping jaws are particularly suitable for the initial clamping of sawn, drawn, forged or rectangular workpieces. Their teeth bite into the material and create a downward pull, ensuring that the workpiece rests securely and stably on the jaw. As the teeth are very low-profile, only a small amount of allowance is required on the raw material, which significantly reduces material consumption. The standard PMC-HMC gripping jaw was developed for the PMC and HMC series.
Workpiece clamping
The aim of any clamping device is to secure the workpiece precisely and firmly in place without deforming it excessively. To ensure this is achieved in every situation, Gremotool clamping systems can be fitted with various types of jaws across all series and sizes.
Gripper Jaws
Gripper jaws are particularly suitable for the initial clamping of sawn, drawn, forged or rectangular workpieces. Their teeth bite into the material and create a downward pull, ensuring that the workpiece rests cleanly and stably on the jaw. As the teeth are very low-profile, only a small amount of allowance is required on the raw material, which significantly reduces material consumption.
Supplied in pairs
All Gremotool jaws are supplied in pairs. This is to enable the clamping system to be put into use as quickly as possible. All Gremotool clamping systems are supplied with the standard jaws as standard. However, to expand the range of applications and make the most of the clamping system’s flexibility, additional jaws can be ordered.
